Event Setup - LG LDV-S504 Owner's Manual

Schedule Copy Settings
1. Select the source day to copy.
2. Select the destination day among the day of
week, weekday or weekend options.
3. Click the Copy button to copy the schedule data.
Special Day Settings
1. Mark up the Special Day option.
2. Select the date to set the special day schedule
setting.
3. Mark up the desired recording option.
4. Select the channel to set the schedule.
5. Click the start time cell block and drag&drop to
select period time cell block.
or
Click the start time cell block of a channel and
drag&drop across the channels to select the peri-
od time block for multi channels setting at a time.
The cell blocks color will be changed.
6. Enter the Special day's name.
7. Click the Add button to add the special day set-
tings.
The Special day is added to the list.
If you want to cancelled the registered special
day, select the special day in the list and click the
Delete button.

Event setup

1. Set the Event options.
Sensor In : Displays the number of SENSOR-
IN terminal.
Sensor Type : The alarm state can be set to
either N.O. (Normally Open) or N.C. (Normally
Closed).
Linked Camera : Select the connected camera
channel with the SENSOR-IN terminal.
Alarm Out : Select the alarm output number of
ALARM-OUT terminal for output alarm signal.
2. Set the Etc options.
Alarm Off : Select the Manual or Post-Alarm
Time option to off method.
- Manual : Use the ALM.OFF to stop alarm.
- Post-Alarm Time : Select the post-alarm
time.
55