LG LDV-S504 Owner's Manual page 33

Sensor On :
- ON : Sending the E-mail when an sensor has
occurred.
- OFF : Not used.
Motion Detect :
- ON : Sending the E-mail when an Motion detec-
tion has occurred.
- OFF : Not used.
Disk Full :
- ON :Sending the E-mail when the HDD has fully
recorded.
- OFF : Not used.
Admin PW Changed :
- ON : Sending the E-mail when administrator
password has changed.
- OFF : Not used.
Video Loss :
- ON : Sending the E-mail when a video signal
from the camera has stopped because of a cable
disconnection or malfunction of a camera.
- OFF : Not used.
Power On/Off :
- ON : Sending the E-mail when power is On or
Off.
- OFF : Not used.
Mail
Notification
- ON : Notify to the user about unit operating infor-
mation by E-mail according to your notification
settings.
- OFF : Notification function is not used.
The Mail options are dimmed.
SMTP Server : Enter the SMTP Server address
using the virtual keyboard.
If the Notification is set to ON and the SMTP server
option is empty, the SMTP Port No., User Name,
Password options are dimmed and not to set these
options.
SMTP Port No. : Enter the SMTP Port Number
using the virtual keyboard. Typically the TCP port
used for SMTP is 25. However in some cases it is
better to change this port number for added flexibil-
ity or security. If desired change the port number
(25 or 1025 ~ 65535).
User Name : Enter the user name using the virtual
keyboard.
Password : Enter the password using the virtual
keyboard.
Mail Address (1-4) : Enter the mail address using
the virtual keyboard.
You can input the E-mail address up to 4.
E-mail Test : Select [Test] to test sending E-mail.
Note :
The SMTP Server, SMTP Port No., User Name or
Password settings are optional. The DVR can send e-
mail directly without the use of SMTP server or MTA
(message transfer agent). In certain cases all e-mail
should be forwarded to a specific SMTP server.
Specify the server host name or IP address in such
case. For more detail SMTP setup, ask your network
administrator and/or mail service provider.
Emergency
Notification :
- ON : Notify to the Emergency Agent about unit
operating information according to your notifica-
tion settings.
- OFF : Notification function is not used.
IP/Port No. : Enter the IP/Port Number of the
Emergency Agent program is installed in PC using
the virtual keyboard. Factory default port for this
function is 9002. However in some cases it is better
to change this port number for added flexibility or
security. If desired change the port number (1025 ~
65535).
You can set the IP/Port Number up to 9.
33