LG LDV-S504 Owner's Manual page 36

Log In/Out
Auto Logout : You can set the logout time.
- ON : Logout is automatically at fixed intervals.
- OFF : Not used. The time option is dimmed.
Time : You can set auto logout time to 5 minutes,
10 minutes, 30 minutes or 60 minutes.
Backup
Schedule : You can set the backup schedule
- OFF : All options are disabled.
- INSTANT : The backup data saved manually.
- WEEKLY or DAILY : The backup data will be
automatically saved according to the setting.
Device : Select the backup device.
Schedule Start : Set the Schedule start date (A
day of week and Time).
Time Range : Enter the backup time range.
- Date : Enter the date you want to backup.
- Start : Enter the start day of week or time.
- End : Enter the end day of week or time.
Estimation Size : Displays the size of backup data
and the free space of external USB devices.
Start Backup : To start backup.
Erase Media : To erase the media.
36
Notes :
• Use the recommended external USB devices for
preventing malfunction (See page 64).
• You cannot format the CD-R, DVD-R or DVD+R
discs.
• An external media has to be formatted on this unit
for preventing malfunction.
• DVD+RW and DVD-RW discs have to be initialized
before using.
• You cannot use the Estimation Size, Start Backup
and Erase Media options in backup progressing.
• Do not remove the USB device during the backup
is in progress, it may cause the malfunction. If you
reuse the removed device, you must format the
media by using Erase Media options.
• If you format the external media by using PC with
FAT32 type, the media may not be used on this
unit.
Instant backup
1. Connect the USB device for backup.
2. Select INSTANT on the Schedule option.
3. Select the backup device.
4. Enter the date, start time and end time on the
Time Range option for backup.
5. Select [Estimation Size] icon and press ENTER.
6. Check the size of selected data and free space of
USB device. If the USB device has not enough
space, change the USB device of enough space
or erase the connected USB device.
7. Select [Start Backup] icon and press ENTER to
start backup.
8. Exit the setup menu.
You can check the backup status on the system
control bar in backup progress.
Notes :
• You cannot stop the backup in backup progress.
• The warning message will appear in conditions list-
ed below.
- When the start time and end time are same
value.
- When the end time is later than the start time.
- A media has not enough space.
- When you set the time that the data does not
exist.
• The disc burning is used by single session closed
format.