Remote Control - LG LDV-S504 Owner's Manual

Remote Control

POWER (1 1 )
Turns DVR on or off.
LOCK
Displays the lock menu to change
the user type or disable the sys-
tem operation.
ID
Set the appropriate system ID of
the DVR to operate via the IR
Remote Controller when using the
multiple DVR.
Press the ID button then, press
the number button within 2 sec-
onds to select the system ID of
the DVR.
If you set the system ID to "0", you
can control the multiple DVR at
the same time.
MAIN
Displays the MAIN menu to set
the screen mode of monitor
among full, 4, 6, 8, 9 or 16
screens.
SPOT
Enter SPOT mode to allow spot
monitor control.
ALM.OFF
Cancels alarm activation and
returns the system to the condition
before the alarm was activated.
OSD
Accesses or removes the System
Control Bar (OSD).
SETUP/ESC
Displays the setup menu or can-
cels operation on the setup
menus.
Arrow buttons (b b B B v v V V )
Selects or moves on the menu
options.
ENTER
Confirms menu selections.
COPY
Copies the recording data to
external device.
SEARCH
Displays the searching menu.
MARK
Set the Mark point for recording
search. You can set the mark
point during the single channel
playback of recorded data.
PAUSE (X X )
Pauses playback.
STOP(x x )
Stops playback.
REC (z z )
Start or Stop recording.
m/c/.
Search backward the recorded
images or skip the recorded
images.
bB
Playback or reverse playback
recorded image.
M/C/>
Search forward the recorded
images or skip the recorded
images.
Number buttons (0,1-9)
To select the PTZ preset number,
ID or channel.
INFO
Display or remove the System
information window.
LOG
Display or remove the System Log
List window.
PTZ
Switches this unit to PTZ mode to
control the PTZ camera connect-
ed.
TOUR
Tour all registered preset positions
in the camera.
ZOOM + / -
Zooms in/out on live images or in
playback window.
FOCUS + / -
Adjust the focus of a camera.
IRIS + / -
Adjust the iris of a camera.
PRESET
- SET : Register camera preset
positions of PTZ camera.
- CLEAR : Delete a memorized
preset position.
- MOVE : Move the camera to the
preset position.
F1
This button is not available.
11