Table of Contents
Advertisement
To clear the preset position
You can clear a memorized preset position.
1. Press CLEAR button or Click the [CLEAR] icon.
2. Use number buttons to enter the memorized pre-
set index number then press ENTER or Click the
[ ] icon.
To clear the preset positions.
Note :
The function may not be available depend on PTZ
cameras.
To tour the preset positions
You can tour all preset positions.
1. Press TOUR button or Click the [TOUR] icon.
All registered preset positions in the camera will
be selected, and the camera position image will be
switched on the active monitor.
2. You can stop the tour by pressing TOUR button or
Click the [TOUR] icon.
Setup for PTZ camera
You can adapt the camera to your requirements by
setting up the respective items in menus.
1. Click the [SETUP] icon.
The SETUP MENU appears on the selected win-
dow of main monitor.
2. Use arrow, ZOOM +/- and ENTER buttons to set
the options.
Notes :
• Refer to the manuals of the PTZ camera for more
details.
• Some PTZ camera may not be operated properly
with this unit.
• You cannot control the other functions when the
PTZ virtual remote control is displayed.
24
V
iewing the System
V
iewing the System
Information
Information
You can view the system information.
1. Press INFO or click the INFO icon in the system
control bar.
The system information window is displayed on
the main monitor.
2. Press INFO or click the [Exit(Info)] button to exit
the window.
V
iewing the System Log List
V
iewing the System Log List
You can view the system log list.
1. Press LOG or click the LOG icon in the system
control bar.
The system information window is displayed on
the main monitor.
2. Use b / B to see the previous or next log list.
3. Press LOG or click the [Exit(LOG)] button to exit
the window.
Notes :
The system log message indicate Power On/Off,
Power recovery, Remote and Local user login/logout,
Configuration Changed, Configuration Imported,
Backup and Export informations (Start, finished,
failed).
Advertisement
Table of Contents
