System Settings - LG LDV-S504 Owner's Manual

System Settings

System Settings
Date/Time
NTP : Set to On when using the NTP (Network
Time Protocol) server for time adjustment. If you
set the NTP to off, you should enter the time set-
tings manually and the Time Server, Private Time
Server, Sync. Interval and NTP Test options are
inactivated.
Date : Enter the current date.
Time : Enter the current time.
Date Format : Select the date display format.
Daylight Saving : Set to ON when you use day-
light saving function.
Time Zone : Select your Time Zone.
Time Server : For most cases select public. The
DVR will obtain the average time among 5 public
servers (rime.nist.gov, time-a.nist.gov, time-
b.nist.gov, ntp.nasa.gov, clock.isc.org).
Private Time Server : Enter the private time serv-
er's IP address or host name using the virtual key-
board.
Sync. Interval : You can set synchronize interval
with NTP time server to 1 day, 1 hour, 1 month and
1 week.
NTP Test : Select [Test] to test NTP server.
Buzzer
34
Button Beep
- ON : Make a sound when using the buttons.
- OFF : Turn off the button beep.
Sensor Buzzer
- ON : Make a sound when an sensor occur.
- OFF : Turn off the sensor buzzer.
Motion Buzzer
- ON : Make a sound when an motion detect.
- OFF : Turn off the Motion buzzer.
Note :
The buzzer is a low sound on this unit. If you want to
make a loud sound, connect an external alarming
devices to ALARM-OUT terminals (ex. Siren).
User
Administrator : Enter the password to get the
authority of this unit as an administrator, using the
virtual keyboard.
Power User : Enter the password to get the
authority of this unit as a power user, using the vir-
tual keyboard.
Normal User : Enter the password to get the
authority of this unit as a normal user, using the vir-
tual keyboard.
Note :
Remember the new password. If you forget the new
password, please contact authorized service center
or where you purchased.