7. Click the Search icon.
The smart search data is displayed.
8. Select the channel in the list.
9. You can play the searched data using the play-
back control buttons.
Remote Setup Mode
Remote Setup Mode
You can set the DVR of selected site name in the
Remote Setup tab via network.
Camera & Display setup
Camera Setting
1. Select a channel to settings.
If you want to prevent a channel from other users,
mark up the convert option. The marked up chan-
nels are displayed "Video Loss" on the live win-
dows for POWER or NORMAL user.
2. Enter the new channel name.
3. Select input audio channel.
4. Set the PTZ control options.
Port : Select the connected data port of RS-
422/485 terminal on the rear panel.
Control ID : Select the PTZ camera ID from 0
to 255. Make the same settings as the PTZ
camera.
Protocol : Select the protocol supported by
PTZ camera.
Baud Rate : Select the communication
speed.(1200, 2400,4800,9600,19200 or
38400)
5. Set the Motion options.
Sensitivity : Set the sensitivity for the created
motion detection area. Sensitivity can be set 0
to 10 level.
Alarm Out : Select the number of ALARM-
OUT terminal for output alarm signal when the
motion detected.
Area : Select the desired motion detection area
on the preview window screen using the
mouse. Clicking the one point and drag&drop
the end point to select the motion area.
Notes :
• If you want to display the grid, mark up the [Show
grid] option.
• If you want to select all area, click the [Select All]
button or click the [Clear All] button to cancel the
selected area.
53