Schedule Settings - LG LDV-S504 Owner's Manual

Schedule Settings

Schedule Settings
The DVR can record as a schedule set by the user. It
can also record manually regardless of date and
time. The recording can be made either continuously
or triggered by events (alarm and motion detection).
The Recording Schedule screen displays one day of
the week showing the schedule of all channels over a
24-hour period.
For each 1-hour cell block the recording method can
be specified. The recording method (Continuous,
Sensor, Motion, Sensor+Motion) for each block is
shown in color for easy viewing.
Channel
numbers
To set one day of week recording
schedule
1. Select a day of week.
2. Select the desired channel to schedule recording.
3. Select the time cell block for the start time.
4. Press ENTER or Click the left mouse button to
select recording mode. The cell blocks color will
be changed automatically.
- Gray : No schedule recording
- Green (Continuous recording) : Recording
starts automatically on the preset time.
- Red (Sensor event recording) : Recording
starts automatically when sensor alarm is
occurred within a designated time.
- Blue (Motion event recording) : Recording
starts automatically when motion detected
within a designated time.
- Yellow (Sensor+Motion recording) : Recording
starts automatically sensor alarm signal has
input or the motion has detected.
5. Select the next time cell block of period schedule
time cell block to confirm the schedule time.
28
6. Press ENTER or Click the left mouse button
7. Press SETUP/ESC to move previous menu.
To set special day recording
schedule
In addition to the weekly schedule, up to 10 specific
date/time periods can be defined. To configure the
specific recording schedule select Specific Dates.
1. Select the [Special Day] option.
2. Select the schedule time and set the recording
Time line
1-hour
cell block
Recording mode
3. Press ZOOM + button or click the [Add] icon on
4. Enter the necessary information for year, month
repeatedly to select gray color for setting the end
of schedule time. The settings cell block is high-
lighted.
method of each channels.
the special day setting menu.
The specific date selection menu appears.
and date.
• b / B / v / V : Press to move the columns,
[OK] or [Cancel] buttons.
• b / B (or left/right mouse button): Changes
the value at the current position.
• ENTER : Confirm the selection.
• Press ESC to exit the specific date selection
menu.