Change The Display Mode From % Display To Engineering Unit - YOKOGAWA DY025 User Manual

4.3.1 Change the Display Mode from % Display to Engineering Unit

The display mode can be changed referring 5.3 parameter list.
SET
SHIFT INC
Press " SET " key.
SET
SHIFT INC
Press " SHIFT " key.
SET
SHIFT INC
Press " INC " key any time.
SET
SHIFT INC
Press " SET " key.
SET
SHIFT INC
Press " INC " key.
Indication of %
display.
Enter the setting
mode.
Enter the parameter
item.
Indicate " 30 "
referring 5.3
parameter list.
Enter the data
input item.
SHIFT
SHIFT
SHIFT
SHIFT
IMPORTANT
After setting a parameter, keep the power on for at
least 30 seconds.
If the power of flowmeter is turned off, a parameter
setting is released.
4-4
4. BASIC OPERATING PROCEDURES
Indicate " 01 " of
engineering unit
referring 5.3
parameter list.
SET
INC
Press " SET " key.
Ensure the setting
data.
SET
INC
Press " SET " key.
Finish the setting.
SET
INC
Press " SET " and " SHIFT " key.
Return to display
mode.
SET
INC
IM 01F06A00-01E
F040302.EPS