Memory Measurement Mode; Detailed Display Mode (Memory Recall Mode); Data Clear Mode - YOKOGAWA AQ2160-02 User Manual

2-4-2 Memory Measurement Mode

Data measured in normal measurement mode and setting
conditions can be saved in the instrument's memory. Also, you can
display saved data (addresses and measured data only).
Measurement continues even while data saved in memory is being
displayed.
■ Standard Memory and User Memory
This instrument has two types of memory.
● Standard memory: holds up to 1000 data.
● User memory: holds up to 100 data.
User memory is available for storing important data and settings.
We recommend that you use user memory for critical data that
you wish to keep from being easily deleted. The procedure for
saving and recalling data is slightly different for standard memory
and user memory.

2-4-3 Detailed Display Mode (Memory Recall Mode)

Details on measured data saved in memory or settings can be
displayed in this mode. Also, saved measurement conditions can
be loaded and applied to the next measurement.
<Display Example> Detailed Display (Memory Recall)
PWR SAVE PWR SAVE PWR SAVE PWR SAVE
CW CW CW
▲ ▲
▼ ▼
REF REF REF REF
MEMORY MEMORY MEMORY ADRS ADRS ADRS ADRS
DETAIL DETAIL DETAIL DETAIL

2-4-4 Data Clear Mode

Clears data saved to memory.
You can delete one data at a time (ONE), or all data (ALL).
The address are 000 to 999.
The address are U00 to U99.
nm nm nm
DETAIL
indicating the mode in which measured
dB dB dB
data saved to memory is displayed in
detail. In the example, the data saved in
dBm dBm dBm
address 001 is -13.57 dB, which is the
value relative to the reference value of
-3.53 dBm.
17
and ADRS are displayed,