Print Control - Canon iPF5000 series Service Manual

Chapter 2
Media Type
Glossy Photo Paper
Semi-Glossy Photo Paper
Heavyweight Glossy Photo Paper
Heavyweight SemiGlos Photo Paper
Glossy Paper
Photo Paper Plus
Photo Paper Plus Semi-Glos
Synthetic Paper
Adhesive Synthetic Paper
Backlit Film
Backprint Film
Thin Fabric Banner 2
Proofing Paper
Fine Art Photo
Fine Art Heavyweight Photo
Fine Art Textured
Fine Art Watercolor
Fine Art Block Print
Canvas Matte 2
Japanese Paper Washi
POP Board
CAD Tracing Paper
CAD Tranclucent Matte Film
*1 The print engine may automatically select 1-way printing depending on the printing image type (graphic image, etc.). The printing direction can be
selected using the printer driver.

2.2.4 Print Control

iPF5100
1. Print mode
This printer is capable of fast, high-quality printing without blur and non-uniform density by changing the carriage operation, media feeding, other printing methods
according to the selected media type, print quality, print data and so on.
Printing is performed for each color using a maximum of 16 paths in each print mode according to the selected print quality.
This reduces density irregularities caused by the variation in the amounts of ink discharged from individual nozzles. In addition, it shifts the printing timing so that
the current ink layer is nearly fixed before the next ink layer is applied, thus minimizing bleeding.
Even in the same mode, the printer operates in a different way depending on the media setting made using the printer driver.
a) Draft mode
In the draft mode, image data is thinned out and a single band (equivalent to the width of a nozzle array) is printed using one or two paths.
To use this mode, select "Draft" under "Print Quality" in the printer driver.
b) Standard mode
In the standard mode, a single band (equivalent to the width of a nozzle array) is printed using 4-8 (4, 6, or 8) paths.
To use this mode, select "Standard" under "Print Quality" in the printer driver.
c) High quality mode
In the high quality mode, a single band is printed using 8 or 12 paths.
To use this mode, select "High" under "Print Quality" in the printer driver.
d) Highest quality mode
In the high quality mode, a single band is printed using 12 or 16 paths.
To use this mode, select "Highest" under "Print Quality" in the printer driver.
2-8
Print Priority Print Quality
Image Standard
High
Highest
Line Drawing/ Draft
Text
Standard
High
Printing Modes
Print-pass Printing direction(*1)
6-pass Bi-directional
8-pass Bi-directional
16-pass Bi-directional
2-pass Bi-directional
4-pass Bi-directional
8-pass Bi-directional
T-2-3
Print resolution
1200x1200dpi
2400x1200dpi
2400x1200dpi
1200x1200dpi
1200x1200dpi
2400x1200dpi
0016-8958