(13) Holding the knobs[1],take out the printhead from the case.
- Do not touch the nozzles[2] and contacts[3] on the printhead[1]. The printhead can damage or a printing failure can occur. Do not reattach the removed pro-
tective caps.
- Dispose of these parts following the local regulation.
(14) Remove the orange protective cap 1[1], and then pull the protective cap 2[2] downward with the knob pressed.
(15) Insert the print head in the carriage with the nozzles down and the contacts in the back. Insert it as far as it will go while taking care that the nozzles and contacts