Canon iPF5000 series Service Manual page 60

Chapter 1
First Level
[Interface Setup]
[Maintenance]
1-44
Second Level
[TCP/IP] [IP Mode]
[Protocol] (*4)
[IP Setting]
[NetWare] [NetWare ]
[Frame Type] (*8)
[Print Service] (*8)
[AppleTalk] [On]
[Off]*
[Ethernet Driver] [Auto Detect]
[Comm.Mode] (*7)
[Ethernet Type] (*7)
[Spanning Tree]
[MAC Address]
[Init. Settings] [No]*
[Yes]
[Replace P.head] [Printhead L]
[Printhead R]
T-1-11
Third Level Fourth Level
[Automatic]
[Manual]*
[DHCP ]
[BOOTP ]
[RARP ]
[IP Address]
[Subnet Mask]
[Default G/W]
[On]
[Off]*
[Auto Detect]
[Ethernet 2]
[Ethernet 802.2]*
[Ethernet 802.3]
[Ethernet SNAP]
[BinderyPServer]
[RPrinter]
[NDSPServer]*
[NPrinter]
[On]*
[Off]
[Half Duplex]*
[Full Duplex]
[10 Base-T ]*
[100 Base-TX ]
[Not Use]*
[Use]
[No]
[Yes]
[No]
[Yes]
Fifth Level
[On]
[Off]*
[On]
[Off]*
[On]
[Off]*
0.0.0.* to 255.255.255.255
0.0.0.* to 255.255.255.255
0.0.0.* to 255.255.255.255