- If a roll is loaded, be sure to remove the roll before this procedure. Remove the Roll Holder from the Auto Roll Feed Unit. Fasten a paper band or the like around

the paper to prevent the roll from unwinding.

(1) Put the Basket Table [1] on a desk or other flat surface and push it against the desk to eliminate any space between the side of the Basket Table [2] and the edge

of the desk.

(2) Assemble the Output Stacker, referring to steps (4)-(10) in "Installing the Stand" > "Assembling the Output Stacker".

(3) Holding the printer on both sides by the Carrying handles, set it on top of the black parts [2] of the Basket Table [1]. Slide the printer gently back to load it into

the Basket Table. Align the printer with the diagonal line [3] on the left side of the black part [2].

F-3-114

F-3-115

[1]

[2]

F-3-116

F-3-117

Chapter 3

3-35

Table of Contents