Service Parts; Disassembly/Reassembly - Canon iPF5000 series Service Manual

4.1 Service Parts

4.1.1 Service Parts

iPF5000 / iPF5100
The service parts indicated below require careful handling.
1. Keep all packages with the warning not to turn over.
Pay careful attention to all individually packaged service part (carriage unit, purge unit, ink tank unit, and other parts) boxes marked "This side up" and handle
appropriately.

4.2 Disassembly/Reassembly

4.2.1 Disassembly/Reassembly

iPF5000
For the procedure for disassembly/reassembly of the components excluding the major components,refer to the paets catalog.
For the major components,the disassembly flow and detailed disassembly procedures are shown below.
there are the following four major units:
1.Carriage unit
2.Purge unit
3.Cutter unit
4.Ink tank unit
Illustrations in the parts catalog are assigned illustration nombers according to the order in which parts are disassembled.
Major Units Disassembly Flow
* The ink drain operation enclosed in a dashed line must be carried out either manually or automatically.
1) Carriage unit disassembly flow
<Meanings of symbols> c:Connector h:Hook s:screw
2) Purge unit disassembly flow
<Meanings of symbols> c:Connector h:Hook s:screw
Printer
Automatic ink draining
Open top cover
Left/right circle cover
Tank cover (h1,s3)
Left cover (h1,s1)
Lower rear cover (s2)
Left rear cover (s3)
Right upper cover (h4)
Operation panel (c1,h2)
Mist filter (s1)
Filter cover
Right cover (h1,s5)
F-4-1
Manual ink draining
Move carriage onto platen
printhead
Joint base
Linear scale
Carriage belt
Flexible cable (c6)
Flexible cable retainer (
Lift cam sensor (s2)
Ring, Lift gear
Left/Right spring
Carriage rail, Carriage height changing cam
Carriage unit
F-4-2
Chapter 4
0012-6347
0012-6348
4-1