Canon iPF5000 series Service Manual page 238

Hide thumbs Also See for iPF5000 series:
Table of Contents

Advertisement

Chapter 4
The flexible cable connectors[2] are provided with a locking mechanism. When disconnecting or reconnecting the flexible cable, be sure to release the lock. Oth-
erwise, the flexible cable can damage, resulting in malfunction.
8) Insert flat-head screwdriver[3] into the part shown to release hook[2] and then remove flexible cable retainer[1]. (If flexible cable retainer[1] is marked with
index[A], insert the flat-head screw driver to meet the index.)
9) Turn the gear[1] so that the sensor flag of the lift gear[2] leaves the interrupt position of the lift cam sensor[3], then remove the ring[4], the lift gear[2] and the
lift cam[5]. Disconnect the connector[6], remove the two screws[7], and then remove the lift cam sensor[3]. Remove the two torsion springs[8], pull out the
carriage rail[9] from the right side of the printer, and then remove the carriage.
4-30
[1]
[3]
[8]
[9]
[2]
[A]
F-4-75
[8]
[2]
[4]
[5]
[3]
[7]
F-4-76
[6]
[1]

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents