Canon iPF5000 series Service Manual page 63

First Level
[Test Print]
[Information] (*5)
*1: Displayed if a roll is loaded.
*2: Displayed if the Roll Feed Unit is installed.
*3: Displayed if Chk Remain.Roll is On.
*4: Displayed if IP Mode is Automatic.
*5: Only these menus are displayed during printing.
*6: For information on the types of paper the printer supports, refer to the Media Guide. The media type setting in the printer driver and related software (as well
as on the Control Panel ) is updated when you install the Media Configuration Tool from the User Software CD-ROM or if you change paper information by using
the Media Configuration Tool.
*7: Available only if Auto Detect is Off.
*8: Available only if NetWare is On.
*9: Follows the setting in Date Format.
*10: Displayed if paper is loaded in the tray.
*11: This menu is only displayed during printing.
*12: Not displayed if a roll or a sheet has been fed.
Second Level
[Status Print] [No]
[Yes]
[Media Details] [No]
[Yes]
[Print Job Log] [No]
[Yes]
[Menu Map] [No]
[Yes]
[Nozzle Check] [No]
[Yes]
[Version] [Fim]
[Boot]
[MIT]
[RAM]
[Ext. Interface] [No]
[IEEE1394]
[MAC Address] [000085######]
[Error Log] [1:########-####]
[2:########-####]
[Job Log]
(Choose from information
about the latest three print
jobs.)
[Counter] [Cut Count]
T-1-14
Third Level Fourth Level
[Document Name]
[User Name]
[Page Count]
[Job Status]
[Print Start Time]
[Print End Time]
[Print Time]
[Print Size]
[Media Type]
[Interface]
[Ink Consumed]
Chapter 1
Fifth Level
[OK]
[CANCELED]
[yyyy/mm/ddhh: mm]
[yyyy/mm/ddhh: mm]
[xxx sec.]
[xxxxxxxx sq.mm]
[USB ]
[Network]
[IEEE1394]
[xx.x ml]
1-47