(3) Use the Allen Wrench [2] to tighten the Table Bolts [3] and secure the Basket Table [1] to the Stand and Table Stay [4].
(4) Rotate the Basket Rods #1 [1] on both sides all the way toward the front A and then return them to the position at which they lock into place B.
(5) Insert Basket Wire #1 [1] into the hole on the side of the Basket Cloth [2] without the Velcro Tape. Keeping the Velcro Tape side face-down, insert both basket
wires into the holes on both sides of the Basket Table [3].
(6) Insert Basket Rod #2 [2] in the Basket Cloth [1].