Canon iPF5000 series Service Manual page 188

Chapter 3
(4) Hook the Table Stay [1] on the Stand Stay [2] and tighten the Table Stay Bolt [4] with the Allen Wrench [3].
c. Assembling the Output Stacker
(1) With the holes of Basket Table [1] and the Table Stay [2] aligned, set the Basket Table [1] on the Stand.
Be careful to avoid pinching your fingers between the Basket Table and Stand.
(2) Use the L-Shaped Allen Wrench [1] to tighten the eight Stand Bolts [2] and secure the Basket Table [3] to the Stand. Tighten the Stand Bolts [2] in the order
indicated; first at position A, and then at position B.
3-28
[1]
[4]
[4]
[1]
[2]
F-3-90
[1]
[2]
F-3-91
B
[2]
A
A
[3]
F-3-92
[3]
[1]
B