- Be sure to remove the Cassette and Output Tray before installing the printer. Grasp the handle on the front of the Cassette and pull it forward a little. Holding the

Cassette on both sides with both hands, remove the Cassette. Holding the Output Tray on both sides by the far end, press the button to release the lock, and then

remove the Tray.

- If a roll is loaded, be sure to remove the roll before this procedure. Remove the Roll Holder from the Auto Roll Feed Unit. Fasten a paper band or the like around

the paper to prevent the roll from unwinding.

(1) Move the Stand into position and lock the front casters.

(2) While holding the Carrying handles on both sides, align

F-3-77

F-3-78

F-3-79

F-3-80

on the back of the printer with

of the Output Stacker as you set the printer down on the Stand.

Chapter 3

3-23

Table of Contents