(1) Put the Basket Table [1] on a desk or other flat surface and push it against the desk to eliminate any space between the side of the Basket Table [2] and the edge

of the desk.

(2) Assemble the Output Stacker, referring to steps (4) - (10) in "Installing the Stand" > "Assembling the Output Stacker".

(3) Holding the printer on both sides by the Carrying handles, set it on top of the black parts [2] of the Basket Table [1]. Slide the printer gently back to load it into

the Basket Table. Align the printer with the diagonal line [3] on the left side of the black part [2].

Be careful to avoid pinching your fingers between the Basket Table and Stand.

(4) With the printer resting on the Basket Table [1], slide the Basket Table to the right. Align the side [3] of the Basket Table [1] with the edge of the desk so that

the holes [2] are visible.

3-40

[1]

[2]

F-3-130

F-3-131

[1]

[3]

F-3-132

[1]

[3]

F-3-133