(5) Insert the Main Unit Securing Bolt [1] in the hole [3] of the Basket Table [2] from below and tighten it with the Allen Wrench [4] to secure the printer.

(6) Repeat steps (4) and (5) to secure the printer to the Basket Table on the left side the same way.

(7) Return the Basket Table [1] to the original position and push it against the desk to eliminate any space between its side [2] and the edge of the desk.

(8) Hold the Output Tray on both sides by the near end. Aligning the Output Tray with the guides, insert it into the printer until it locks in place.

[2]

F-3-134

F-3-135

[1]

[2]

F-3-136

F-3-137

[3]

[1]

[4]

Chapter 3