Chapter 3
(7) Insert Basket Rod Caps [1] on both ends of Basket Rod #2 [2] until the guide lines [3] are no longer visible.
(8) Insert the Basket Rod Caps [1] onto the left and right Basket Rods #1 [2] until the guide lines [3] are no longer visible.
(9) With Basket Wire #2 [1] positioned so that the bend faces forward, insert it in the hole of the Basket Table [2] from below.
(10) Fold the Basket Band [1] in two and secure it with the Velcro Tape A. Push Basket Wire #2 [2] toward the back B.
3-30
[3]
[1]
[2]
[2]
[1]
[3]
F-3-97
[3]
[2]
[1]
F-3-98
[2]
[1]
F-3-99
[2]
A
[1]
F-3-100
B
[2]