Aaa Configuration Examples; Aaa For Telnet Users By An Hwtacacs Server - HP 12500 Series Configuration Manual

Task
Display information about user
connections. (In standalone
mode)
Display information about user
connections. (In IRF mode)

AAA configuration examples

NOTE:
By default, Ethernet interfaces, VLAN interfaces, and aggregate interfaces are in DOWN state. To
configure such an interface, use the undo shutdown command to bring it up first.

AAA for Telnet users by an HWTACACS server

Network requirements
As shown in
authorization, and accounting services for Telnet users.
Set the shared keys for authentication, authorization, and accounting communication with the
HWTACACS server to expert. Configure the switch to remove the domain name from a username sent to
the HWTACACS server.
Figure 10 Network diagram
Command
display connection [ access-type { dot1x |
mac-authentication | portal } | domain
isp-name | interface interface-type
interface-number | ip ip-address | mac
mac-address | ucibindex ucib-index |
user-name user-name | vlan vlan-id ] [ slot
slot-number ] [ | { begin | exclude | include }
regular-expression ]
display connection [ access-type { dot1x |
mac-authentication | portal } | domain
isp-name | interface interface-type
interface-number | ip ip-address | mac
mac-address | ucibindex ucib-index |
user-name user-name | vlan vlan-id ] [ chassis
chassis-number slot slot-number ] [ | { begin |
exclude | include } regular-expression ]
Figure 10, configure the switch to use the HWTACACS server to provide authentication,
51
Remarks
Available in any view.
Available in any view.