Figure 51 Portal server configuration
Configure the IP address group:
2.
Select Portal Service Management > IP Group from the navigation tree to enter the portal IP
a.
address group configuration page.
Click Add to enter the page shown in
b.
Enter the IP group name.
c.
Enter the start IP address and end IP address of the IP group. Make sure the IP address of the
d.
user host is in the IP group.
Select a service group. By default, the group Ungrouped is used.
e.
Select the IP group type Normal.
f.
Click OK.
g.
Figure 52 Adding an IP address group
Figure
52.
137