HP 12500 Series Configuration Manual page 132

Figure 40 Portal server configuration
Configure the IP address group:
2.
Select User Access Manager > Portal Service Management > IP Group from the navigation tree
a.
to enter the portal IP address group configuration page.
Click Add to enter the page shown in
b.
Enter the IP group name.
c.
Enter the start IP address and end IP address of the IP group.
d.
Make sure the host IP address is in the IP group.
Select a service group.
e.
By default, the group Ungrouped is used.
Select the IP group type Normal.
f.
Click OK.
g.
Figure 41.
122