HP 12500 Series Configuration Manual page 249

[SwitchB-Vlan-interface2] quit
# Set the authentication mode on the user interface to AAA.
[SwitchB] user-interface vty 0 4
[SwitchB-ui-vty0-4] authentication-mode scheme
# Set the protocol that a remote user uses to log in as ssh.
[SwitchB-ui-vty0-4] protocol inbound ssh
[SwitchB-ui-vty0-4] quit
# Import the peer public key from the file pubkey, and name it SwitchKey.
[SwitchB] public-key peer SwitchKey import sshkey pubkey
# For user client001, set the service type as SFTP, authentication method as publickey, public key
as SwitchKey, and working folder as cfa0:/.
[SwitchB] ssh user client001 service-type sftp authentication-type publickey assign
publickey SwitchKey work-directory cfa0:/
Establish a connection to the SFTP server:
3.
# Establish a connection to the SFTP server and enter SFTP client view.
<SwitchA> sftp 192.168.0.1 identity-key rsa
Input Username: client001
Trying 192.168.0.1 ...
Press CTRL+K to abort
Connected to 192.168.0.1 ...
The Server is not authenticated. Continue? [Y/N]:y
Do you want to save the server public key? [Y/N]:n
sftp-client>
# Display files under the current directory of the server, delete the file named z, and check if the file
has been deleted successfully.
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
sftp-client> delete z
The following File will be deleted:
/z
Are you sure to delete it? [Y/N]:y
This operation might take a long time.Please wait...
File successfully Removed
sftp-client> dir
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
drwxrwxrwx 1 noone
-rwxrwxrwx 1 noone
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
nogroup 0 Sep 01 08:00 z
nogroup 1759 Aug 23 06:52 config.cfg
nogroup 225 Aug 24 08:01 pubkey2
nogroup 283 Aug 24 07:39 pubkey
nogroup 0 Sep 01 06:22 new
nogroup 225 Sep 01 06:55 pub
239