HP 12500 Series Configuration Manual page 70

Click the User tab, and select Access User View > All Access Users from the navigation tree to enter
the All Access Users page. Then, click Add to configure a user as follows:
Select the user or add a user named hello.
a.
Specify the account name as dot1x and configure the password.
b.
Select the access service Dot1x auth.
c.
Configure other parameters as needed.
d.
Click OK.
e.
Figure 18 Adding an access user account
Configure the switch
2.
Configure a RADIUS scheme
# Create a RADIUS scheme named rad and enter its view.
<Switch> system-view
[Switch] radius scheme rad
# Set the server type for the RADIUS scheme. When using IMC, set the server type to extended.
[Switch-radius-rad] server-type extended
# Specify the primary authentication server, and configure the keys for communication with the
servers.
[Switch-radius-rad] primary authentication 10.1.1.1
[Switch-radius-rad] primary accounting 10.1.1.1
[Switch-radius-rad] key authentication expert
[Switch-radius-rad] key accounting expert
# Specify the scheme to include the domain names in usernames to be sent to the RADIUS
server.
[Switch-radius-rad] user-name-format with-domain
[Switch-radius-rad] quit
Configure an authentication domain
# Create an ISP domain named bbb and enter its view.
[Switch] domain bbb
# Configure the ISP domain to use RADIUS scheme rad.
60