Table of Contents
Advertisement
Chapter 5 How to use the control panel
Enabling parallel interfaces
The default setting for parallel interfaces is disabled. If printing using
a parallel interface, enable it on the control panel.
• If parallel interfaces are enabled the printer cannot go into sleep
Note!
mode. In such a case, the power used will be higher than interna-
tional ENERGY STAR Program standards.
①①
Press the
or
MENU] will be displayed, and press the
②①
Press the
or
played, and press the
5
③①
Press the
or the
played.
④①
Press the
ENTER button, and a [*] will appear on the right
side of the set value.
⑤①
Press the
Online button, and [ONLINE] will be displayed.
⑥①
Turn the printer power OFF (
Setup Instructions, Chapter 1: Setting Up - Turning Off the
Printer
92
button several times. The [PARALLEL
ENTER button.
button several times. [PARALLEL] will be dis-
ENTER
button.
button, and [ENABLE] will be dis-
) /ON ( l ).
Advertisement
Table of Contents
