Oki B820n User Manual page 55

⑤①
Select [Encrypted Secure Print] from [Job Type] on the [Job Options] tab.
⑥①
Enter the [Password], and click [OK].
(The Windows XP PS printer driver screen)
• Password
Memo
Set 4 - 12 English lower - case characters.
• Request Password for each print job
At the time of printing a password entry screen appears on
the computer.
• Auto Erase Time-out
The time for which print jobs are saved to the printer SD
memory card is set as 5 mins - 23 hours 59 mins. Print
jobs that are passed the saving period will be automatically
deleted from the SD memory card.
• Job Erase
Sets the method to use at the time of deleting print jobs from
the SD memory card.
• Delete File
Delete a print job using the file system. There is a possibility that
print jobs deleted from the SD memory card using this method
may be restored, however, it is the quickest method of deleting.
• Overwrite with Zeros
Delete a print job after overwriting with specific data. This
deletion method is safer than the simple delete method,
however, there is a possibility that print jobs can be re-
stored using a special method.
⑦①
Print from the computer. If you put a check in the [Request
Password for each print job] box, enter the [Password] on the
[Secure Setting] screen, and then click [OK].
2
Enter the password on the printer control panel and then print.
①①
Press the button several times, select [PRINT JOBS
MENU] and press the
②①
Press the button several times, select [ENCRYPTED JOB],
and then press the
③①
The password entry screen will appear, so enter the password.
④①
[PRINT/DELETE] is displayed in [ENCRYPTED JOB], so when
printing, select [PRINT], and then press the
ton. Print encrypted authenticated print jobs.
Memo
• If you make a mistake when entering the password, press the
Back Button, to set it.
• In order not to print, you can select the
④ , in order to cancel a job.
• If [ARE YOU SURE? YES/NO] is displayed, you can check that [YES]
is selected, and press the
• After carrying out an encrypted authenticated print, you the
file you used to print will be deleted using the specified dele-
tion method. While the file is being deleted, a message saying
[FILE ERASING] will be displayed.
• If a data transfer fails, or if it is detected that the data has been
tampered with, a message will be displayed saying [PRESS ONLINE
SW/INVALID SECURE DATA], and the relevant data will be deleted.
ENTER button.
ENTER button.
ENTER but-
button in Procedure
ENTER button to cancel the job.
3
55