Table of Contents
Advertisement
C
onnecting to a computer
In this section you will interconnect your printer and computer, install the
printer driver in your computer and print a test page.
I
nterconnecting printer and computer
I
nterfaces
Your printer is equipped with two data interfaces:
Do not use both parallel and uSB printing together.
>
Parallel: for direct connection to a PC. This port requires a bi-
directional (IEEE 1284 compliant) parallel cable.
>
USB: for connection to a PC running Windows 98 or above. This
port requires a shielded cable less than 5m long conforming to
USB version 2.0.
Note
Interface cables are not supplied with your printer.
The following interfaces are available as optional accessories and are
described in their accompanying installation documentation:
>
RS232 Serial interface
>
100BASE-TX/10BASE-T network connection
Note
Refer to the Network Configuration Guide for setting up the network
connection.
It is not recommended that you use either the parallel or USB port
when the RS-232C or okiLAN 7120e option is installed in this product.
CautIon!
Connecting to a computer > 15
Advertisement
Table of Contents
