Oki B820n User Manual page 131

②①
Click the [Security] tab.
③①
Click the [IPSec] tab.
④①
Enable [IPSec] in [STEP1].
• If you set IPSec to [Enable], access will not be possible from
Note!
any computer other than that with the IP address set in [Step
2].
• If IPSec setting fails due to reasons such as the set value
not matching the cmoputer, you will not be able to open the
website. In such a case, disable IPSec by disabling the [IPSec]
wetwork setting item on the control pannel, or by initializing
the network.
8
131