Oki B820n User Manual page 101

⑥①
Click on [OK] to initiate restarting of the printer, and the
configured printer status will turn
(Green)).
⑦①
When restarting of the printer has finished, the configured
printer status will turn
• Configure web settings
①①
Refer to the IP address or the MAC address from the list, and
select the printer you would like to configure.
• The MAC address will be displayed in Network Information.
Memo
(Setup Instructions)
• For initial configuration, the method of obtaining IP addresses
is [DHCP/BOOTP] . If there is a DHCP/BOOTP server on the
network, the IP address obtained from the network will be dis-
played.
②①
Click the [Device Settings] icon.
(Red) (it is normally
(Green).
③①
Put a check in [Device Settings(Web)-Enable] and click on [OK].
④①
Enter the password in [Password] and then click [OK].
• On the first time the password is the last 6 digits of the refer-
Memo
enced MAC Address. In this example, it is 62F8D8.
• When entering the password [●●●●●●] will be displayed on the
screen.
• When entering the password, please make sure that you enter
upper and lower - case letters correctly.
⑤①
If you configured the settings correctly, the following screen
will be displayed.
6
101