Table of Contents
Advertisement
Chapter 8 Regarding Networks
Network Card Setup
You can configure printer network settings or display the web brows-
er.
Operating environment
Windows 8.1/Windows 8/Windows Server 2012/Windows Server
2012 R2/Windows 7/Windows Vista/Windows Server 2008/Win-
dows Server 2008 R2/Windows XP/Windows Server 2003
A computer operating with TCP/IP
• For Windows 7/Windows Vista/Windows Server 2008/Windows
Note!
Server 2008 R2/Windows XP/Windows Server 2003
administrator rights are required for setup.
Here Windows XP Home Edition is used as an example.
Main methods of use
• Launching the Utility
①①
Turn the printer power ON ( l ).
②①
Check that Windows is launching and set the Software DVD -
ROM in the drive.
The setup program will launch.
③①
Select the printer you are using, and click on [Next].
8
④①
Read the [Software License Agreement], and click [I Agree].
176
(only for Windows)
⑤①
• Configure printer network settings
①①
②①
③①
Click on [Device Configuration] and click on [Network Card Setup].
Launch Network card setup.
• If at the time of launching the NIC Setting Tool on Windows 7/
Memo
Windows Vista/Windows Server 2008/Windows Server 2008
R2/Windows XP/Windows Server 2003 there is a message dis-
played saying [Windows Security Alert], click [Allow access].
NIC Settings Tool will launch.
Refer to the IP address or the MAC address from the list, and
select the printer you would like to configure.
• The MAC address will be displayed in Network Information.
Memo
(Setup Instructions)
•
For initial configuration, the method of obtaining IP addresses
is [DHCP/BOOTP]. If there is a DHCP/BOOTP server on the
network, the IP address obtained from the network will be dis-
played.
Select [Setting Printer] from the [Setting] menu.
Advertisement
Table of Contents
