Software Installation - Flashforge Creator Pro Start Up And Instruction Manual

Software Installation

ReplicatorG0040r24-Sailfish is the recommended software to use with the dual extruder Creator Pro. Users
can find the installer on the provided SD card, which shipped together with the Creator Pro.
Steps for installing your software on Windows operating system:
1. From the SD card shipped with your printer, browse to the "For Windows" folder; Copy this folder to
your computer.
2. Locate the "For Windows" folder; double click to install the Python.
3. Decompress the zip file, you will get a folder named "replicatorg-0040r24-Sailfish"
4. Open this folder and right click the icon "ReplicatorG.exe", choose "send to desktop shortcut".
5. To run the Replicator G software, double click the shortcut on your desktop or in your start menu.
For Windows 32 bits operation system, please double click "python-2.7.8.msi" to install the python; For
Windows 64 bits operation system, please double click "python-2.7.8.amd64.msi" to install the python.
For Mac users, only need to install ReplicatorG, no need for Python.
The following gives an introduction on how to import files (.STL) into the Replicator G software and then
generate Gcode to print your creation.
Click File > Open, then browse and select the file (.STL) that you would like to print, import the file by
double-clicking. Then the drawing will appear on the Replicator G interface.
When the object is imported you may find that it is not on the virtual build platform or even on the screen,
using the function keys indicated by the red boxes you can change the camera angle and reposition the
object onto the center of the build platform. Once you've done this, the next step is to generate the Gcode;
this is achieved by clicking on the button (Generate GCode) at the bottom of the panel.
9
FLASHFORGE 3D PRINTER