Print From Sd Card; Special Note To Pla Printing; Initial Print Over Usb - Flashforge Creator Pro Start Up And Instruction Manual

FLASHFORGE 3D PRINTER
distance between build plate and nozzle, click 'ok' to finish the leveling process.
https://www.youtube.com/watch?v=vXyHNHRY9fg
You can refer to video instruction:
If your platform is too low, your prints might not stick to the surface. Users always complain their prints do
not stick to platform. Actually this is because the platform is not well leveled, it is too low. If it's too high,
the nozzles could tear the sticker on the platform surface.

Print from SD card

Important note: All sample models pre-loaded on SD are generated base on ABS printing, NOT for
PLA. So if you want to print them out, please use ABS spool.
Go to LCD display, select menu 'Print from SD'---select what you want to print.
Note: The model 'traffic cone' is only for dual color extrusion. If you want to print this model out, make
sure you have loaded ABS filament for both extruders.
If you want to print models designed by yourself from SD card, first you need to generate a Gcode for the
model, and then click the third button from left, save it as an x3g file. Copy it onto SD card. Now you can
print it out from SD.

Special note to PLA printing

The top lid and the front door are designed exclusively for ABS printing, NOT for PLA. If user wants to print
with PLA, please make sure you have removed the top lid and open the front door before starting printing.
Otherwise, PLA filament will get soft and wrapped around feeding gear due to high temperature inside the
case which causes print failure.

Initial print over USB

20