Step 2. Select A Range Of Channels (Optional) - HP 8591C User Manual

Step 2. Select a range of channels (optional)

CABLE TV ANALYZER , SYSTEM MEAS , More I of 2 ,
C r e a t e TstPlan
3. Enter the number of the first channel in the range of channels you want to
measure. Use the data keys to enter the first channel number, then press
(ENTER).
4. Enter the number of the last channel in the range of channels you want to
measure. Use the data keys to enter the last channel number, then press
range of channels is scrambled, or press NO if the range of channels is not
scrambled.
N O T E
The scrambled or unscrambled channel status applies to the range of channels that you have just
entered.
6. Select the tests for the range of channels.
If you want to delete all of the tests, press CLEAR TESTS
l
If you want to specify which tests are to be performed, use the data
l
keys to enter the number of the test, then press [ENTER). Repeat this
step for all of the test numbers that you want to select.
System Measurements
Creating a Test Plan
3-25