System Measurements
Making System Measurements
Step 5. Recall a test plan
memory, or RECALL FRM CARD to recall a test plan from a RAM card.
N O T E
If you have not created a test plan, refer to "Creating a Test Plan" later in this chapter.
3. If you selected RECALL FRM INT , select the test plan number under
which the test plan was saved, then press DONE.
For example, if the test plan was saved under test plan 1, press PLAN 1
You can recall a test plan that was previously saved in analyzer memory.
Recalling a test plan will overwrite the current test plan. If you do not want
the current test plan overwritten, save the current test plan before recalling
a test plan. See "3. Save the current test plan in internal memory" in this
chapter for more information.
For information on recalling a test plan from a RAM card, refer to "Recalling a
Test Plan from a RAM Card" later in this chapter.
3-12