HP 8591C User Manual page 136

5. Because there can be up to Eve different test plans saved in analyzer
memory, you need to select a number under which to save the test plan.
Press the softkey with the plan number under which you want the test
plan saved. For example, press PLARl i to save the test plan in plan
number 1.
6. Press DONE .
You can save up to Eve different test plans in analyzer memory. The test
plans are stored in memory even if the analyzer is unplugged from a line
power source.
The channel numbers, tests, scrambling status, channel tuning conEguration,
quiet line number, frequency response line number, color test line number,
test signal type, and Eeld information are stored for each test number of each
channel with the test plan.
Saving a test plan overwrites any previously saved test plan for the same test
plan number.
System Measurements
Creating a Test Plan
3 - 2 9