HP 8591C User Manual page 55

Channel Measurements
Making Channel Measurements
Carrier level and
frequency test
3. Press FRQ RSLN 10 100 Hz to select between the readout resolution of
6. If you want to store the results to a RAM card, insert a formatted RAM
7. If you want to print the results, press IcoPv].
2-12
1. Select a channel, then press CARRIER LVL&FRQ The peak visual carrier
level and visual-to-aural carrier difference appear on the screen. See
Figure 2-6.
visual-to-aural carrier frequency difference appear on the screen. See
Figure 2-7.
100 Hz or 10 Hz. 100 Hz is the default setting as 10 Hz significantly slows
down the measurement. See Figure 2-8.
scrambled channels. The analyzer performs a max hold.
card into the analyzer's card-insertion slot, press (SAVE) display->card ,
then press [MODE) (MODE) to return to channel measurement mode. Refer
to Chapter 3 for the procedure on formatting a RAM card.