HP 8591C User Manual page 122

information about connecting the printer to the analyzer, see "Step 3.
Install a printer," located in Chapter 1.
c. If you want the data to be saved on a RAM card, insert a RAM card in
the card reader, ensure that the RAM card has been formatted and the
write-protect switch is set so the RAM card is not write protected, then
press DUMP TO RAM CARD
See "Formatting a RAM Card" later in this chapter for information
about formatting a RAM card.
23, 1993
M a i n M e n u
the testing to stop after ABORT is pressed.
After measurements are completed, the following screen is displayed.
o
s e n t t o p r i n t e r
s t o r e d P" RbH C a r d
Figure 3-8. Dump Options Menu
System Measurements
Making System Measurements
DUMP TO
SCREEN
DUMP TO
P R I N T E R
DUMP TO
3-15