Making Timed System Measurements - HP 8591C User Manual

Making Timed System Measurements

This procedure describes how to make tests at a later time. Tests at a later
time can also be repeated.
N O T E
Ensure that the analyzer's clock is set to the correct time and date.
1. If Timed Measure is not displayed, press CMODE),
CABLE TV ANALYZER, SYSTEM MEAS
4. Enter the date that you want testing to begin. To enter the date, use
the data keys to enter the date in a year, month, day format, then press
the start date.
5. Enter the time that you want testing to begin. To enter the time, use the
data keys to enter the date in a 24-hour, hour, minute format, then press
date and time as the start date and time.
6. Press STOP TIME
7. Enter the date that you want testing to end. Enter the date (in year,
month, day format) using the data keys, then press [ENTER]. Or, press
TODAY'S DATE if you want to use the current date as the end date.
8. Enter the time (in 24-hour, hour, minute format) you want the testing to
end using the data keys, then press [m].
3 - 2 0