HP 8591C User Manual page 131

System Measurements
Creating a Test Plan
If you selected a video test (differential gain, differential phase, and/or
l
even field, and the desired test signal type when prompted.
If you selected the in-channel frequency response test, enter the
l
frequency response line number, odd, even, or both fields, and the
desired test signal type when prompted.
7. If you want to enter another channel, repeat steps 3 through 6. If you do
not want to enter another channel, press Prev Menu.
You can enter channels into the test plan as individual channels or as a range
of channels. This procedure describes how to enter channels individually into
next
the test plan. The
into the test plan.
E N T E R C h a n n e l n u m b e r u s i n g t h e k e y p a d .
P r e s s Prev M e n u w h e n d o n e entering c h a n n e l s .
s e l e c t e d C h a n n e l s , E N T E R C h a n n e l n u m b e r )
3-24
procedure describes how to enter a range
Figure 3-13. Enter by Channel
of channels
C H S E L
M e n u
RT