Channel Measurements Menu Map and Softkey Descriptions
Channel Measurements Softkey Function Descriptions
The recall from internal memory function recalls a trace into trace B for use
as a reference trace or to recall a system frequency response trace.
This function simplifies recalling a trace from the analyzers internal memory.
A trace can also be recalled from a memory card using procedures provided in
the analyzer user's guide.
Procedure
1. To recall a trace into trace B, press RECALL FRM INT
2. After the message REGISTER # appears, enter the trace number the trace
5-20
was stored under in SAVE TRB TO INT , then press [ENTER].
The trace is recalled to trace B in view mode. It is complete when the
message MAX REG # = 52 is added to the display as shown in Figure 5-9.
START
54.0
YRES BW 5.0 MHz
STOP
YSWP
Figure 5-9. Trace B, Recalled
CONTINUE
MENU
425.0
8.00