Other Settings; Network Setting; Basic Network Setting; Wifi Setting - Wansview NC543 User Manual

http://www.wansview.com
The third party domain name is realized by analysis manner, the domain name
will be displayed in the browser all the time when visit camera. If the port is not
80, the port number should be adding to the domain name with colon.
Example:

7 Other Settings

7.1 Network Setting

7.1.1 Basic Network Setting

The user can also enter the Basic Network Settings to set the IP address except using
the search software. See below Figure 11.

7.1.2 WIFI Setting

If the device is with WIFI, enter the Wireless LAN Setting, just as below Figure 12 shown,
click the "Search" button several times, it will show you the wireless network detected in
the Wireless Network List column. Select one of them and tick "Using Wireless Lan",
then the relevant data of the selected wireless network will be shown in the following
blanks. Put in the password and click "Set", then the WIFI setting is finished.
Figure 10
http://robbicam2.3322.org:81
Figure 11
13