Firmware Upgrade; Restore Factory Default; User Browsing Log - Wansview NC543 User Manual

http://www.wansview.com

7.4.3 Firmware upgrade

The device runs 2 kinds of programmer, one is system firmware, the other is application
firmware. They could be upgraded separately.

7.4.4 Restore Factory Default

Click "Restore Factory Default", it will pop up a dialogue to confirm if you really want to
restore the factory default. After confirmation, the system will restore the factory default
and reboot.

7.4.5 User browsing Log

After enter the log interface, you could view who and when the device is visited.
Figure 26
Figure 27
21