Maintain; Device Information; Time Setting - Wansview NC543 User Manual

http://www.wansview.com
As Figure 22, User can maximum add 9 devices to view the device simultaneously. Click
refresh button to check the device in the LAN. When click the device, will popup setting
dialogue box and input the device info, as figure 23 and click save. After that, must click
submit button to save.

7.4 Maintain

7.4.1 Device Information

7.4.2 Time Setting

If the device is connected to the Internet, you enable the NTP server to correct the time
and select the right time zone. Or you should use the PC's time to correct its time.
Figure 24
Figure 24
Figure 25
20