Ftp Service Setting; Advanced; User Setting - Wansview B Series User Manual

http://www.wansview.com
When it detects alarming, it can send email to your appointed email box, but you need to
set email service parameters correctly. Example of figure 18, click "Submit" to save these
parameters, and then you can click "Test" to check if the setting is successful.（Notice：
Before setting these parameters, please check if they are OK.）
When you set email service parameters correctly, can active "enable "Report Internet IP
by mail". After every restart, the device will send its Internet IP address to user's email
address. You can use the ip address to visit the device when it was mapped to internet.

3.3.3 FTP Service Setting

Figure 19 FTP service setting
When alarming, device will snap and send the image to FTP server, please make sure
the FTP setting is correct. Above Figure 19 of FTP setting for your reference, after the
setting is finished, click "Test" to check your settings are correct or not.
（Notice：For using the FTP function, you need to apply a user with authority that you
can write and create submenu and some memory space）
After correct setting FTP server, you can use "upload Image Periodically" function. Even
no alarm, device can also send the snap image to FTP periodically.

3.4 Advanced

3.4.1 User Setting

Figure 20 User setting
17