Table of Contents
Advertisement
Chapter 4: Powering On the Chassis
116
3. To display the status of the line cards, use the SHOW CARD
command in the Privileged Exec mode. A line card has a state of
"Online" when it is operating normally. An example of the status
information is shown in Figure 84 on page 116.
awplus# show card
Slot
Card Type
---------------------------------------------------
1
AT-XEM2-12XT
2
AT-XEM2-12XT
3
AT-XEM2-12XT
4
AT-XEM2-12XS
5
AT-XEM2-12XS
6
AT-XEM2-12XS
7
AT-XEM2-4QS
8
AT-XEM2-4QS
Figure 84. SHOW CARD Command
4. To display the states of the individual ports on the Ethernet line cards,
use the SHOW INTERFACE STATUS command in the Privileged
Exec mode.
For information about the command line interface, refer to the
Software Reference for SwitchBlade x908 Gen2 Series Switches on
the Allied Telesis web site.
5. Go to "Cabling the Networking Ports" on page 117.
State
Online
Online
Online
Online
Online
Online
Online
Online
Advertisement
Table of Contents
