Figure 27: Removing The Blank Power Supply Panel From Power Supply Slot B; Figure 28: Lifting The Locking Handle On The At-Sbxpwrsys2 Power Supply - Allied Telesis AT-SBx908 Gen2 Installation Manual

Chapter 3: Installing the Chassis
62
Figure 27. Removing the Blank Power Supply Panel from Power Supply
3. Lift the handle on the AT-SBxPWRSYS2 AC Power Supply. Refer to
Figure 28.
Figure 28. Lifting the Locking Handle on the AT-SBxPWRSYS2 Power
4. Carefully align the power supply in the slot and slide it into the slot until
it makes contact with the connector inside the chassis. Refer to Figure
29 on page 63.
Slot B
Supply